Problem Solving
85
q
Check that the PS is available for printing, and the
total memory is installed more than or equal to
12MB by printing selftest page.
- If PS is not available for printing, install the
PS SIMM. (For information about installing
procedure of the PS SIMM, see page 99)
- If the total memory is lower than 12MB, Install
the 8MB SIMM provided with the PS option.
(For more information about installing procedure
of the printer memory, see page 92)
1. Open the Properties of PS driver.
2. Click on PostScript.
3. Click on the Advanced button.
4. The pure binary data is not supported.
Choose the others.
q
Make sure that the printer is powered on.
q
Check that the LocalTalk cable is completely plugged
into the printer and your Macintosh.
1. Open the PS driver Properties.
2. Set Ôoption cassetteÕ item of Device Option to
installed
.
The PS file is not
printed.
The Error messages
(This job contains
binary data...) are
printed.
For Macintosh User
Your printer name
does not appear on
the chooser dialogue
box.
The Optional cassette
is not selected in PS
driver.
Problem
Solution
PS(PostScript) Problems