Manual page
DADF.
is on, jammed paper
is detected in the
DADF.
and remove the
jammed original.
(Page 11.1)
operating.
door and clear any
jammed paper (if
there is). If this error
message shows on
the screen again,
cycle power. If the
problem persists, call
for service.
in the registration
area.
(Page 11.6)
is at the end of its
life. When the drum
replacement
message appears
on the screen and if
you select
Continue, this
message displays.
cartridge with a
Samsung-genuine
drum cartridge.
(Page 10.4)
is at the end of its
life. When the drum
replacement
message appears
on the screen and if
you select Stop, this
message displays.
cartridge with a
Samsung-genuine
drum cartridge.
(Page 10.4)
machine connot
recognize refilled or
reinstalled toner.
When users face
this case, they have
to buy and change
toner cartridge.
cartridge with a
Samsung-genuine
toner cartridge.
(Page 10.3)
document failed to
actuate the scan
sensor within the
correct time after
actuating the
registration sensor.
and remove jammed
original. (Page 11.1)
with the SMPS
(Switch Mode Power
Supply) Fan.
cord and plug it back
in. If the problem still
persists, please call
for service.
operating.
the output tray
(finisher). If this error
message shows on
the screen again,
cycle power. If the
problem persists, call
for service.
operating.
the output tray
(finisher) and open
the finisher door to
clear the jammed
paper. If this error
message shows on
the screen again,
cycle power. If the
problem persists, call
for service.
Fault
is not operating.
the output tray
(finisher). If this error
message shows on
the screen again,
cycle power. If the
problem persists, call
for service.
Communication
Error
between the toner
cartridge and the
machine has failed.
cartridge. If the
problem persists,
replace it.
Replace Toner1
cartridge has run
out. The machine
stops print job.
cartridge with a
Samsung-genuine
toner cartridge.
(Page 10.3)
is almost empty.
cartridge is in stock.