Manual page
system. You can change the default settings for your preferences and
needs.
password and press OK.
depending on the international communication regulatory. If
the display screen does not show or gray out some of the
fax options explained herein, it means that the grayed out
function does not supported in your communication
environment.
to print on your copies. Set this option On and
an input screen will be displayed, write your
message using the pop up keyboard.
be printed at the top of each page.
extension telephone connected to the EXT
socket on the back of your machine. You can
receive a fax from someone you are talking to
on the extension telephone, without going to the
fax machine. (Page 6.4)
Mode
any faxes you send are properly transmitted to
any other ECM-equipped fax machines.
Sending a fax using ECM may take more time.
or Answering Machine/Fax, and Dial Type at
either DP (Dial Pulse) or MF (Multi Frequency).
When you select Answering Machine/Fax,
you can receive a fax while the line is being
used by the answering machine. (Page 6.4)
Contact your local telephone company for Dial
Type setting information.
Delay
machine rings before answering an incoming
call.
number, date and time of fax reception at the
bottom of each page.
from being accessed by unauthorized people.
This feature restricts printing of received faxes
when the machine is unattended. If you select
this option to On, all incoming faxes go into
memory.
A four-digit Passcode is used when you want to
print out received faxes in memory. (Page 6.5)
Printing
than the paper loaded in the tray, the machine
can reduce the size of the original to fit the size
of the paper loaded in the machine. If this
feature is set to Off, the machine cannot reduce
the original to fit onto one page. The original will
be divided and printed in actual size on two or
more pages. If you set this option to On and set
the discard size to 10mm and the received data
is longer then the currently set paper in the tray,
the machine minuses the data that would have
been on the specified discard segment.
fax machine, if it was busy. You can set the
number of redial attempts and an interval
between attempts. Selecting 0 for Redial
Attempts means that the machine will not use
this feature.
(Audio Line
Monitor)
starts to transfer data. If this option is On, the
machine sounds from a fax starts until a fax
finishes. With Comm. the machine sounds only
until the communication is succeeded. No
sound with Off option.