Manual page
installed, or the fax
is not working
properly.
the problem persists,
please call for
service.
does not work
properly.
and turn it on again. If
the problem persists,
please call for
service.
Area
in the tray feed area.
Or the tray cover is
opened.
(Page 11.3)
Area
Area
Feeding Jam
document failed to
actuate the scan
sensor within the
correct time after
actuating the duplex
sensor.
input tray and remove
the jammed original.
(Page 11.1)
document failed to
actuate the duplex
sensor within the
correct time when
the document was
fed the wrong way.
input tray and remove
the jammed original.
(Page 11.1)
document failed to
actuate the gate
sensor within the
correct time after
actuating the scan
sensor.
and remove the
jammed original.
(Page 11.1)
Document
Detected
or double-feeding of
originals.
and remove the
jammed original.
(Page 11.1)
Check the document
size whether it is
supported.
(Page 14.1)
Jam
jammed in DADF.
and remove the
jammed original.
(Page 11.1)
An Auto IP
address has been
established.
not work. The
machine is working
with the setting IP by
auto IP setting
function.
setting again or
assign a new static IP
address.
An Auto IP is not
working.
does not work, and
the auto IP setting is
failed.
setting again or input
the new static IP
address.
Initializing
when installing the
new drum cartridge
up to 180 sec.
seconds until the
machine is ready.
Communication
Error
between the drum
cartridge and the
machine has failed.
The drum cartridge
is invalid.
cartridge. If the
problem persists,
replace it.
is near the end of its
life.
cartridge in stock.
during duplex
printing.
(Page 11.6)
during duplex
printing.
(Page 11.6)
during duplex
printing.
(Page 11.6)
operating.
the output tray
(finisher). If this error
message shows on
the screen again,
cycle power. If the
problem persists, call
for service.
available fax
memory. No more
fax data can be
received.
fax data in the
memory. Call for
service to delete fax
memory.