Manual page
these features. Energy Saver has three
options, first Low Power Mode to Sleep Mode
turns off the scanner lamp under the glass. And
Power Save turns off all the fans within the
machine after a certain time. Standby to Low
Power Mode turns off the fans within the
machine except a core fan for the fuser unit.
(Page 3.4)
Management
paper you use for a printing job. Paper size,
paper type, and paper color options are
adjusted here. Tray Confirmation Message is
to activate the window asking whether you set
the paper size and type for the just opened tray.
• Auto Tray Switch: If tray1 and tray2 are filled
and this option is On, then the machine
continues printing with paper in tray2.
the letter size paper, but the printing job
needs A4 size paper, the machine will wait for
30 seconds to paper in tray1 with proper
sized paper. After 30 seconds, the machine
automatically starts printing with Letter sized
paper.
Adjustment
pressure, which atmospheric pressure is
determined by the height of the machine above
sea level. This feature lets you adjust the
altitude in a height district. Higher altitude
location need to set this feature to High 3,
which affects print quality.
out, you to let the machine stop processing and
wait to refill the staples or continue the job. If
you set Within Job Offsetting to On, the
output paper is placed and sorted by printout-
sets.
Management
between copy jobs and print jobs.
• Priority: Set the priority by numbering the
highest number in order.
password and press OK.
sound. Press Fault to adjust the machine's
error sound. Select Conflict if you pressed the
wrong option. Press Selection to sound
whenever you press the selection from your
touch screen.
Management
drum and toner to reorder, and resets the used
fuser counter, bias transfer roller, feed roller and
document feeder friction pad counter.
using Image Quality Test Patterns.
Overwrite
information on HDD as you store new job
information. To activate this feature, go to
Admin Setting > the Setup tab > Optional
Service and set the On Demand Image
Overwrite option to Enable. After activating
this feature you can overwrite a HDD by
pressing Start in the display.
include the page number on the bottom of each
page.
time on each copy, set from the General tab.