Manual page
Troubleshooting_ 68
IP Conflict
The network IP
address you have set
is being used by
someone else.
Check the IP address
and reset it if
necessary. (See
Low Heat Error
Cycle Power
There is a problem in
the fuser unit.
Unplug the power cord
and plug it back in. If the
problem persists,
please call for service.
LSU Hsync Error
Cycle Power
A problem has
occurred in the LSU
(Laser Scanning Unit
).
Unplug the power cord
and plug it back in. If the
problem persists,
please call for service.
LSU Motor Error
Cycle Power
A problem has
occurred in the LSU
(Laser Scanning Unit.
)
Unplug the power cord
and plug it back in. If the
problem persists,
please call for service.
Main Motor Locked
There is a problem in
the main motor.
Open and then close
the front cover.
Open Heat Error
Cycle Power
There is a problem in
the fuser unit.
Unplug the power cord
and plug it back in. If the
problem persists,
please call for service.
Self Diagnostics
Temperature
The engine in your
printer is checking
some problems
detected.
Please wait a few
minutes.
Self Diagnostics
LSU
The engine in your
printer is checking
some problems
detected.
Please wait a few
minutes.
Tray 1
Paper Empty
There is no paper in
the tray 1.
Load paper in the tray 1.
Tray 2
Paper Empty
There is no paper in
the optional tray 2.
Load paper in the
optional tray 2. (See
Install Toner
A toner cartridge is
not installed
Install a toner cartridge
Invalid Toner
The toner cartridge
you have installed is
not for your printer.
Install a
Samsung-genuine toner
cartridge, designed for
your printer.
MESSAGE
MEANING
SUGGESTED
SOLUTIONS
Non Genuine Toner
◄Stop►
The toner cartridge
installed is not a
genuine cartridge.
You can select either
Stop or Continue. If
you do not select any,
the printer will work as
Stop is selected.
If you select Stop, you
cannot print until the
genuine cartridge is
installed. However, you
can still print any kind of
reports.
If you select Continue,
you can keep printing
but the quality cannot
be guaranteed, and the
product support is no
longer provided.
If you want to change
the selection, turn the
printer off and on to
have this message
appear again, and then
re-select Stop or
Continue.
NonGenuine Toner
Replace Toner1
The toner cartridge
installed is not a
genuine cartridge.
This message appears
when you selected Stop
at the NonGenuine
Toner prompt.
Install the genuine toner
cartridge.
NonGenuine Toner
Replace Toner
The toner cartridge
installed is not a
genuine cartridge.
This message appears
when you selected
Continue at the
NonGenuine Toner
prompt.
Install the genuine toner
cartridge.
Toner Low
Replace Toner
Small amount of toner
is left in the cartridge.
The estimated
cartridge life of toner
is close.
If you do not
want this
message to
appear, see
Prepare a new cartridge
for replacement. You
may temporarily
increase the printing
quality by redistributing
the toner. (See
MESSAGE
MEANING
SUGGESTED
SOLUTIONS