B
U
SING
Y
OUR
M
ACHINE
ON
A
N
ETWORK
B.7
3
Press Enter to access the menu.
4
Press the scroll button ( or ) until you see the desired
protocol on the bottom line.
5
Press Enter.
If you selected “TCP/IP,” assign a TCP/IP address. For
If you selected “NetWare”, set the frame type format. For
6
Press Enter to save the selection.
7
Press Stop/Clear to return to Standby mode.
Configuring TCP/IP
Your machine can be set up with a variety of TCP/IP networks
information, such as an IP address, a Subnet Mask, and a
Gatway. There are several ways in which your machine can be
assigned a TCP/IP address, depending on your network.
• Static Addressing: A TCP/IP address is assigned manually
by the system administrator.
• Dynamic Addressing BOOTP/DHCP (default): A TCP/IP
address is assigned automatically by the server.
N
OTE
: Before configuring the TCP/IP, you need to set network
protocol to TCP/IP.
Static Addressing
To enter the TCP/IP address from your machine’s control panel,
take the following steps:
1
Press Menu until you see “Network Setup” on the top line
of the display.
2
Press the scroll button ( or ) until “Config Network”
displays on the bottom line.
3
Press Enter to access the menu.
The first available menu item, “TCP/IP,” appears on the
bottom line.
4
Press Enter.