U
SING
Y
OUR
M
ACHINE
ON
A
N
ETWORK
B.8
The first available menu item, “Manual,” appears on the
bottom line.
5
Press Enter.
The first available menu item, “IP Address,” displays on the
bottom line.
6
Press Enter to access the IP Address menu.
An IP address consists of 4 bytes.
7
Press the scroll button ( or ) to enter a number between
0 and 255 and press Enter or Upper Level to move
between bytes.
You can enter a number using the number keypad and use
the scroll button ( or ) to move between bytes.
8
Repeat step 7 to complete the address from the 1st byte to
the 4th byte.
9
Press Enter.
10
To select other parameters, such as a Subnet Mask or a
Gateway, press the scroll button ( or ) until the desired
item displays on the bottom line. Press Enter.
11
Repeat steps 7 through 9 to configure the other TCP/IP
parameters.
12
Press Stop/Clear to return to Standby mode.
Dynamic Addressing (BOOTP/DHCP)
To have the TCP/IP address assigned automatically by the
server, take the following steps:
1
Press Menu until you see “Network Setup” on the top line
of the display.
2
Press the scroll button ( or ) until “Config Network”
appears on the bottom line.
Enter a number between 0
and 255 for each byte.