Manual page

Samsung SCX-5312F FAX (ver.1.00)
R
ECEIVING
A
F
AX
3.4
Receiving Automatically in FAX
Mode
Your product is preset to FAX mode at the factory. If you have
changed the fax mode, take the following steps to receive faxes
automatically:
1
Press Receive Mode repeatedly until you see “FAX” on the
lower line of the LCD display.
You can also use the navigation keys to select the desired
receive mode after pressing Receive Mode.
2
When the desired mode is displayed, press Mode/Enter to
save the selection.
3
When you receive a call, the product answers the call on a
specified number of rings and receives a fax automatically.
To change the number of rings, see “System Data Options”
on page 6.5.
To adjust the ringer volume, see “Adjusting Ringer Volume” on
page 1.11.
Receiving in TEL/FAX Mode
1
Press Receive Mode repeatedly until you see “TEL/FAX” on
the lower line of the LCD display.
You can also use the navigation keys to select the desired
receive mode after pressing Receive Mode.
2
When the desired mode is displayed, press Mode/Enter to
save the selection.
3
When you get a call, the product answers it.
If a fax is being sent, the product goes into reception mode.
If the product does not detect a fax signal, it will continue
ringing to tell you it is a phone call. If you do not answer the call
by pressing On Hook Dial, it will automatically switch to
reception mode and start to receive fax.