G
ETTING
S
TARTED
1.11
1
3
Press
or
to display the desired status or use the
number keypad to enter the desired value for the option
you have selected.
4
Press Mode/Enter to save the selection. The next System
Setup option appears.
5
If necessary, repeat Steps 2 to 4.
6
To return to Standby mode, press Stop/Clear.
Adjusting Ringer Volume
1
Press Menu/Exit and then System Setup on the
one-touch dial keypad.
2
Press
or
until you see “RINGER VOLUME” on the
upper line of the LCD display.
3
Press
or
until you see the desired loudness on the
lower line of the LCD display. 10 levels are available.
You’ll hear the selected volume and the LCD display will
show the level. Setting to the left end turns the ringer off.
The product will work normally even if the ringer is set to
off.
4
Press Mode/Enter to save the change.
5
To return to Standby mode, press Stop/Clear.
Adjusting Speaker Volume
1
Make sure that the LCD display shows date and time (Fax
Standby mode). If not, press Mode/Enter to switch to the
Fax mode.
2
Press On Hook Dial. You’ll hear dial tone.
3
Press
or
repeatedly until you find the desired
loudness. The LCD display shows the current volume level.
4
Press On Hook Dial to save the change and return to
Standby mode.