Manual page
R
ECEIVING
A
F
AX
3.2
About Receive Mode
Your product has four reception modes:
• In FAX mode, the product answers an incoming call and
immediately goes into fax receive mode.
• In TEL mode, you can receive a fax by picking up the handset
of the extension phone and then pressing the remote receive
code (see page 3.6), or pressOn Hook Dial (you can hear
voice or fax tone from the remote machine) and then
pressing Copy/Start on the control panel of your product.
• In TEL/FAX mode, the product answers an incoming call
expecting to receive a fax. If the product does not sense a fax
signal, it will continue to sound the ringing tone to tell you it
is a phone call. If you do not lift the handset during the
ringing, the product will switch to fax receive mode.
• In ANS/FAX mode, the answering machine answers an
incoming call, and the caller can leave a message on the
answering machine. If the fax machine senses a fax tone on
the line, the call automatically switches to Fax mode.
N
OTE
:
To use the ANS/FAX mode, attach an answering machine
to the EXT jack on the back of your product.
The current receive mode is displayed when the product is in
Standby mode.
If you seldom use the fax line for voice conversations, set your
product to receive a fax automatically by selecting the FAX
mode.
Current
receive mode