Manual page

Samsung SCX-5312F FAX (ver.1.00)
G
ETTING
S
TARTED
1.10
Changing the System Setup Options
To display or change the default system setup options:
1
Press Menu/Exit and then System Setup on the one-
touch dial keypad. You can see the first option, “PREFIX
DIAL NO.” on the upper line of the LCD display.
2
Press
or
to scroll through the options. The current
status for your selection will be displayed in the lower line of
the LCD display.
FAX
DUPLEX
With this option enabled, you can print 2-
sided fax pages. You can select LONG EDGE
or SHORT EDGE according to the desired
binding orientation. Setting OFF turns the
feature off.
IMAGE
QUALITY
You can improve the print quality to 1200
dpi for copying. The TEXT setting refines
the print quality of characters by smoothing
out jagged edges that can occur on the
angles and curves of the characters. The
IMAGE setting refines the print quality of
photo image by smoothing the shades of
grey. The NORMAL setting will print the
received faxes with normal quality (600
dpi).
N
OTE
: If you use the TEXT setting for
document with photographs or IMAGE setting
for text document, you may not get the
desired print quality.
SCAN
SLEEP
MODE
The scan lamp under the document glass
automatically turns off when it is not in
actual use to reduce power consumption
and extend the lamp life. The lamp will
automatically wake up after some warm-up
time when you start scan.
This option allows you to determine the
length of time the scan lamp waits after a
scan job is completed before it switches to
sleep mode. Select from 4HOURS, 8HOURS
and 12 HOURS. Setting OFF always turns
the lamp on.
Option
Description