Installing Printer Options
9.2
3
Hold the control board cover and remove it.
4
Completely open the latches on each side of the DIMM
slot.
5
Remove the memory DIMM from its antistatic package.
Locate the alignment notches on the bottom edge of the
DIMM.
6
Holding the memory DIMM by the edges, align the notches
on the memory DIMM with the grooves on the memory
DIMM slot.
Notches
Connection
Points
Groove
Notch
7
Push the DIMM straight into the DIMM slot until it snaps
into place. Make sure the latches fit over the notches
located on either side of the DIMM.
8
Replace the control board cover.
9
Reinstall the duplex-slot cover or the optional duplex unit.
10
Reconnect the power cord and printer cable, and turn the
printer on.
After installing the memory DIMM, you need to select it in the
printer properties of the PostScript printer driver so that you
can use it with your printer:
11
Make sure that the PostScript printer driver is installed in
your computer. To installing the PS printer driver, you need
to select Custom and put a check mark on the PS printer
driver. For details, see the Software Section.
12
Click the Window Start menu.
13
For Windows 95/98/Me/NT4.0/2000, select Settings and
then Printers.
For Windows XP/2003, select Printers and Faxes.
14
Select the Samsung ML-3560 Series PS printer.
15
Click the right mouse button on the printer icon and select
Properties.
16
For Windows 95/98/Me, select Device Options tab.
For Windows NT4.0/2000/XP/2003, select Device
Settings tab.
17
Select the memory DIMM you installed in from Printer
Memory in the Installable Option section and click OK.
For Windows 98, select Installable Option
→ VMOption
→ change setting for:VMOption → change memory.
Latch