Manual page
Problems
table for suggested solutions.
does not
print.
receiving power.
Check the power switch and the
power source.
selected as the
default printer.
PCL 6 or Samsung ML-3560
Series PS as your default printer.
the following:
• The toner cartridge
If a printer system error occurs,
contact your service representative.
• Close the printer cover.
• Install the toner cartridge. See
in manual feed mode
and out of paper.
paper to the Multi-Purpose Tray, and
press the On Line/Continue
button on the printer’s control panel.
between the
computer and the
printer is not
connected properly.
reconnect it.
between the
computer and the
printer is defective.
another computer that is working
properly and try to print a
document. You can also try using a
different printer cable.
incorrect.
make sure that the print job is sent
to the correct port. If the computer
has more than one port, make sure
that the printer is attached to the
correct one.
configured
incorrectly.
ensure that all of the print settings
are correct.
does not
print.
may be incorrectly
installed.
details, see the Software Section.
Try printing a test page.
malfunctioning.
control panel to determine if the
printer is indicating a system error.
selects print
materials
from the
wrong paper
source.
selection in the
printer properties
may be incorrect.
paper source selection is found
under the Paper tab within the
printer properties. Select the correct
paper source. For details, see the
Software Section.
not feed into
the printer.
loaded correctly.
reload it correctly.
Check that the paper size guides are
set correctly.
paper in the paper
tray.
thick.
specifications.
extremely
slow.
complex.
page(s) or try adjusting the print
quality settings.
To adjust the print quality settings,
reduce the resolution. If you have
set the resolution to 1200 dpi
(Best), change it to 600 dpi
(Normal). For details, see the
Software Section.
Change the port setting to the USB
or network port to improve print
speed.
Your printer prints A4-sized paper at
33 ppm and letter-sized paper at 34
ppm.
Me, the Spooling
Setting may be set
incorrectly.
Settings and Printers. Right-click
the Samsung ML-3560 Series
PCL 6 printer icon, choose
Properties, click the Details tab,
and then choose the Spool
Settings button. Select the desired
spool setting.
have insufficient
random-access
memory (RAM).
See “Installing Memory DIMM” on
page 9.1.