Setting Up Your Printer
2.8
Changing the Display Language
To change the language that is displayed on the control panel,
follow these steps:
1
In ready mode, press the Menu button (
) on the
control panel until you see “Setup” on the bottom line of
the display.
2
Press the Enter button (
) to access the menu.
3
Press the scroll button (
or
) until you see “LCD
Language” on the bottom line.
4
Press the Enter button (
) to confirm the menu item.
5
Press the scroll button (
or
) to display the language
you want to use.
6
Press the Enter button (
) to save the selection.
7
Press the On Line/Continue button (
) to return to
ready mode.
Using the Toner Save Mode
The Toner Save mode allows the printer to use less toner on
each page. Activating this mode extends the life of your toner
cartridge and reduces your cost per page beyond what one
would experience in the normal mode, but it reduces print
quality. This setting is not available with the 1200 dpi setting.
There are three ways to enable the Toner Save mode:
Using the Control Panel Button
Press the Toner Save button (
) on the control panel. The
printer must be in ready mode; the On Line/Continue button
(
) is on in green and “Ready” is shown on the display.
• If the Toner Save button backlight is on, the mode is
enabled and the printer uses less toner to print a page.
• If the Toner Save button backlight is off, the mode is
disabled and the printer prints in normal mode.
Using the Control Panel Menu
You can set the Toner Save item in the Graphics menu to turn
the Toner Save mode on or off.
For further details about using the control panel menu, see
page 3.2.
From the Software Application
You can set the Toner Save mode from the printer properties
window on your printer driver. For details, see the Software
Section.
Installing Printer Software
You must install software using the supplied Printer
Drive CD after you have set up your printer and
connected it to your computer. For details, see the
Software Section
.
The Printer Drive CD provides you with the following software:
If you are printing from Windows
You can install the following printer software using the Printer
Drive CD.
• PCL printer driver for Windows. Use this driver to take
full advantage of your printer’s features. See the
Software Section
for details about installing the
Samsung PCL printer driver.
• PostScript Printer Description (PPD) file for Windows
to allow installation of the PostScript driver.
To install the PostScript driver, you need to select Custom
and put a check mark on the PostScript driver when you
install the software. For details, see the Software
Section.
• Smart Panel. Appears when printing errors occur. See the
Software Section for details about installing the Smart
Panel program.
If you are printing in Linux
You can print from a Linux-based computer with your printer.
Go to the Software Section for information about installing
the Linux driver and printing from a Linux environment.
If you are printing from a Macintosh
You can print from a Macintosh with your printer. Go to the
Software Section for information about installing the print
software and printing from a Macintosh.