Manual page
installed in your printer. You can upgrade the firmware of the
network interface card and print a configuration page.
Network
values.
If you select Yes, the following options are
available: Config TCP, Config 802.11b,
AppleTalk, and Netware.
or not.
If you select Yes, you can configure the IP
address.
If you select Yes, the IP Get Method option
appears on the display. You can select how to
get the IP address.
Method
Config TCP to Yes.
• BOOTP: The BOOTP server allots the IP
Get Method to Static. This item lets you
enter the IP address manually. Press the scroll
button to set the value of the 1st byte between
0 and 255, and then press the Enter button.
Set the value for the 2nd, 3rd, and 4th byte
the same way.
Get Method to Static. This item lets you
enter the subnet mask manually. Press the
scroll button to set the value of the 1st byte
between 0 and 255, and then press the Enter
button.
Set the value for the 2nd, 3rd, and 4th bytes in
the same way.
Get Method to Static. This item lets you
enter the gateway manually. Press the scroll
button to set the value of the 1st byte between
0 and 255, and then press the Enter button.
Set the value for the 2nd, 3rd, and 4th bytes in
the same way.
environments.
If you select Yes, the following options are
available: SSID, Operation Mode,
Channel, Authentication, Encryption,
Using Key, Key Type, and Key1~Key4.
See “Configuring the Wireless Network” on
page 8.4
use the AppleTalk protocol. Select On to use
the protocol.
protocol.
If you select On, you can access the Config
Netware menu item.
In the Config Netware menu, you can
specify the frame type parameter used on your
network.