Manual page
Low Heat Error
fuser is abnormally low.
plug it in again. If the
problem persists, call for
service.
Over Heat Error
fuser is abnormally high.
plug it in again. If the
problem persists, call for
service.
Error
your printer engine.
printer.
in the LSU (Laser
Scanning Unit) in the
printer.
plug it in again. If the
problem persists, call for
service.
System
turning on.
on completely.
Press Cont Key
is empty in manual feed
mode.
material and press the On
Line/Continue button.
You need to press the
button each page to be
printed.
[Size] In [Tray]
in the printer properties
does not match the
paper you are loading.
the tray.
have enough memory to
print the current job.
automatically cleared and
the printer will return to
ready mode.
Expand the memory in your
printer. See“Installing
Memory DIMM” on
page 9.1.
pressed.
and cannot print.
Continue button.
of paper. Once the paper is
removed from the output
bin, the printer resumes
printing.
was sent to the printer.
and remove unnecessary
graphics from your
document.
If the message persists,
expand the memory in your
printer. See “Installing
Memory DIMM” on
page 9.1.
[Size] In [Tray]
empty.
of paper into the tray.
the paper feed area.
from the tray in use,
referring to page 7.4.
around the toner
cartridge.
from the printer, referring
to page 7.6.
the paper exit area.
from the output tray,
referring to page 7.7.
The paper size specified
does not match the
paper you are loading.
press the On Line/
Continue button.
(xxx: Emulation)
jobs using the displayed
language.
and ready to printer.
Close Tray 1
there is paper in the
Multi-Purpose Tray.
message.
Close Tray 2
open but there is paper
in the Multi-Purpose
Tray.
clear the message.
with other devices on
the network.
administrator and choose
an address within your
subnet which will not
conflict with any other
devices.
Low Toner
your printer is nearly
empty.
referring to page 6.2.