Manual page
C.6
Setting Up a Network-Connected Printer
You have to set up the network protocols on the printer to use
it as your network printer. Setting protocols can be
accomplished by using the supplied network program. Please
refer to SyncThru User’s Guide.
You can configure the basic network parameters through the printer’s
control panel. Use the printer control panel to do the following:
• Enable or disable network protocols (IPX/SPX)
• Configure TCP/IP
• Configure IPX frame types
Configuring Network Parameters on the
Control Panel
Supported Operating Systems
N
OTE
: The operating systems supported by the network card may
be different than the operating systems supported by the printer.
The following table shows the network environments supported by
the printer.
• IPX/SPX: Internet Packet eXchange/Sequenced Packet eXchange
• TCP/IP: Transmission Control Protocol/Internet Protocol
• DLC/LLC: Data Link Control/Logical Link Control
• DHCP: Dynamic Host Configuration Protocol
• BOOTP: Bootstrap Protocol
Item
Requirements
Network Interface
10/100 Base-TX (standard for CLP-510N)
or 802.11b Wireless LAN
Network Operating
System
• Novell NetWare 4.x, 5.x, 6.x
• Windows 95/98/Me/NT 4.0/2000/2003/XP
• Various Linux OS
• Macintosh OS 10.3.x
Network Protocols
• Netware IPX/SPX
• TCP/IP, DLC/LLC on Windows
Dynamic Addressing
Server
DHCP, BOOTP
U
SING
Y
OUR
P
RINTER
ON
A
N
ETWORK