S
OLVING
P
ROBLEMS
7.28
Jam
Inside Printer
A paper jam has occurred
inside the printer.
Open the right cover and remove the
jammed paper from the printer,
Lever Unlocking
Error
After installing a transfer
belt, the lock levers has
not been locked.
Push the lock levers on each side
away from you, referring to
Press
Continue Button
The printer is waiting for
the user’s action before
printing from the manual
feeder.
Load a sheet of print material and
press the On Line/Continue
button. You need to press the button
for each page to be printed.
Load
[Size] In Tray1
Load
[Size] In Tray2
Load
[Size] In MP
The paper size specified in
the printer properties
does not match the paper
you are loading.
Load the correct paper in the tray
Main Motor
Error
A problem has occurred in
the main motor of the
printer.
Unplug the power cord and plug it in
again. If the problem persists, call for
service.
Memory Overflow
The printer does not have
enough memory to print
the current job.
An error has occurred in
the firmware program of
the printer.
The job automatically clears and the
printer returns to Standby Mode.
• Expand the memory in your printer.
Paper Empty
[Size] In Tray1
Paper Empty
[Size] In Tray2
Paper Empty
[Size] In Mp
Paper Empty
[Size] In Manual
The paper tray has run
out of paper.
Load paper in the paper tray. See
Page Too Complex
Too much complicated
data was sent to the
printer.
Simplify the page layout and remove
unnecessary graphics from your
document.
To expand the memory in your
Ready
[Color]Low Toner
The corresponding toner
cartridge in your printer is
low on toner.
Redistribute the toner in the
corresponding toner cartridge,
Message
Status
Do this...