10
.2
<Installing accessories>
6
Push the DIMM straight into the DIMM slot until it snaps into place.
Make sure the latches fit over the notches located on either side of
the DIMM.
7
Replace the control board cover.
8
Reconnect the power cord and printer cable, and turn the printer
on.
Setting the memory in the PostScript printer
properties
After installing the memory DIMM, you need to select it in the printer
properties of the PostScript printer driver so that you can use it.
1
Make sure that the PostScript printer driver is installed in your
computer. To installing the PostScript printer driver, you need to
select
Custom
and put a check mark on the PostScript printer
driver. See the
Software Section
.
2
Click the Windows
Start
menu.
3
For Windows 2000, select
Settings
and then
Printers
.
For Windows XP/2003, select
Printers and Faxes
.
For Windows Vista, select
Control Panel
->
Hardware and Sound
->
Printers
.
4
Select the
Samsung ML-3470 Series
printer.
5
Click the right mouse button on the printer icon and select
Properties
.
6
For Windows 2000/XP/2003/Vista, select
Device Settings
tab.
7
Select the amount of memory you installed from
Printer Memory
in
the
Installable Option
section.
8
Click
OK
.
Installing a wireless network interface card
ML-3471ND
is equipped with a network interface which allows you to
use your printer on a network. You can also purchase a wireless network
interface card to enable the use of the printer in wireless network
environments
Review the precautions on page 10.1 and then follow this procedure to
install the wireless network interface card in your printer.
1
Turn the printer power off and unplug all cables from the printer.
2
Grasp the control board cover and slide toward you to open it.
3
Align the connector on the wireless network interface card with the
connector on the control board. Push the card firmly into the
connector on the control board until it is completely and securely in
place.
1
control board cover
1
1
connector
2
wireless network
interface card
1
2