Manual page
suggested solutions.
does not
print.
receiving power.
connections. Check the power
switch and the power source.
selected as the
default printer.
is not closed.
page 9.1.
loaded.
cartridge is not
installed.
be in manual feed
mode and out of
paper.
add paper to the multi-purpose
tray, and press
cable between
the computer and
the printer is not
connected
properly.
and reconnect it.
cable between
the computer and
the printer is
defective.
another computer that is
working properly and try to print
a document. You can also try
using a different printer cable.
incorrect.
setting to make sure that the
print job is sent to the correct
port. If the computer has more
than one port, make sure that
the printer is attached to the
correct one.
does not
print.
(Continued)
be configured
incorrectly.
ensure that all of the print
settings are correct.
may be
incorrectly
installed.
the
malfunctioning.
the control panel to determine if
the printer is indicating a
system error.
selects print
materials
from the
wrong paper
source.
selection in the
printer properties
may be incorrect.
applications, the paper source
selection is found under the
Paper tab within the printer
properties. Select the correct
paper source. See the
not feed into
the printer.
been loaded
correctly.
and reload it correctly.
Check that the paper size
guides are set correctly.
paper in the tray.
tray.
thick.
printer specifications.
extremely
slow.
very complex.
page(s) or try adjusting the
print quality settings.
To adjust the print quality
settings, reduce the resolution.
If you have set the resolution to
USB or network port to improve
print speed.
Your printer prints A4-sized
paper at 33 ppm and letter-
sized paper at 35 ppm and your
printer prints A4-sized paper at
17 ipm and letter-sized paper at
18 ipm in the duplex printing
mode.
may have
insufficient
random-access
memory (RAM).
printer. See page 10.1.