Manual page
4
.3
<Network setup(ML-3471ND only)>
Configuring EtherTalk
EtherTalk is AppleTalk used in an Ethernet network. This protocol is
widely used in Macintosh network environments. To use EtherTalk, take
the following step:
1
Press
Menu
until
Network
appears on the bottom line of the
display and press
OK
.
2
Press the
scroll
buttons until
EtherTalk
appears and press
OK
.
3
Press the
scroll
buttons until
On
appears and press
OK
.
4
Press
Stop
to return to Standby mode.
Setting Ethernet speed
You can select the communication speed for Ethernet connections.
1
Press
Menu
until
Network
appears on the bottom line of the
display and press
OK
.
2
Press the
scroll
buttons until
Ethernet Speed
appears and press
OK
.
3
Press the
scroll
buttons until the speed you want appears and
press
OK
.
4
Press
Stop
to return to Standby mode.
Restoring the network configuration
You can return the network configuration to its default settings.
1
Press
Menu
until
Network
appears on the bottom line of the
display and press
OK
.
2
Press the
scroll
buttons until
Clear Setting
appears and press
OK
.
3
Press
OK
when
Yes
appears to restore the network configuration.
4
Power the printer off and back on.
Printing a network configuration page
The network configuration page shows how the network interface card
on your printer is configured.
1
Press
Menu
until
Network
appears on the bottom line of the
display and press
OK
.
2
Press the
scroll
buttons until
Network Info
appears and press
OK
.
3
Press
OK
when
Yes
appears.
The network configuration page prints out.