4
.2
<Network setup(ML-3471ND only)>
Configuring TCP/IP
Your printer can be set up with a variety of TCP/IP network information,
such as an IP address, a subnet mask, a gateway, and DNS addresses.
There are several ways in which your printer can be assigned a TCP/IP
address, depending on your network.
• Static addressing: A TCP/IP address is assigned manually by the
system administrator.
• Dynamic addressing via BOOTP/DHCP (default): A TCP/IP address
is assigned automatically by the server.
Note
Before configuring TCP/IP, you need to set the network
protocol to TCP/IP.
Static addressing
To enter a TCP/IP address from your printer’s control panel, take the
following step:
1
Press
Menu
until
Network
appears on the bottom line of the
display and press
OK
.
2
Press
OK
when
TCP/IP
appears.
3
Press the
scroll
buttons until
Static
appears and press
OK
.
4
Press
OK
when
IP Address
appears.
5
Set the first byte between 0 and 255 using the
scroll
buttons and
press
OK
to move to the next byte.
Repeat this to complete the address from the 1st byte to the 4th
byte.
6
When you have finished, press
OK
.
7
Repeat step 5 and 6 to configure the other TCP/IP parameters:
subnet mask and gateway address.
8
Press
Stop
to return to Standby mode.
Dynamic addressing (BOOTP/DHCP)
To have a TCP/IP address assigned automatically by the server, take the
following step:
1
Press
Menu
until
Network
appears on the bottom line of the
display.
2
Press
OK
when
TCP/IP
appears.
3
Press the
scroll
buttons until
DHCP
or
BOOTP
appears and press
OK
.
4
Press
Stop
to return to Standby mode.
Using SetIP program
This program is for the network IP setting using the MAC address which
is the hardware serial number of the network printer card or interface.
Especially, it is for the network administrator to set several network IPs
at the same time.
1
Insert the driver CD provided along with your machine.
2
Start Windows Explorer and open the X drive. (X represents your
CD-ROM drive.)
3
Double click
Application
>
SetIP
.
4
Open the language folder you want to use.
5
Double click Setup.exe to install this program.
6
From the Windows Start menu, select
Programs
>
Samsung
Network Printer Utilities
>
SetIP
.
7
Select the name of your printer and click "
".
Note
If you cannot find your printer name click "
" to refresh the
list.
8
Enter the network card's MAC address, IP address, subnet mask,
default gateway, and then click
Apply
.
Note
If you do not know the network card's MAC address, print the
machine's network information report.
9
Click
OK
to confirm the settings.
10
Click
Exit
to close the SetIP program.
Note
If you are in a non-static IP address environment and need to
setup a DHCP network protocol, go to the
http://
developer.apple.com/networking/bonjour/download/
,
select the program
Bonjour for Windows
due to your
computer operating system, and install the program. This
program will allow you to fix the network parameter
automatically. Follow the instruction in the installation window.
This program does not support Linux.