Manual page
G
ETTING
STARTED
1.21
1
Using Save Mode
Toner Save
Toner Save feature allows the printer to use less toner on each
page. Activating this mode will extend the life of the toner
cartridges two times longer than normal mode, but will reduce
the print quality.
To turn the Toner Save mode on, take the following steps:
1
Press SAVE Toner. The display shows the current setting
on the bottom line.
2
Press SAVE Toner or use the navigation buttons to change
the setting.
To enable the Toner Save mode on, select “ON.” The button
backlight is on. To disable the mode, select “OFF.” The
button backlight is off.
3
Press Mode/Enter (Enter for SCX-5112) to save the
selection.
Paper Save
This feature prints 2 pages on a single sheet of paper to save
paper. To turn this feature on, take the following steps:
1
Press SAVE Paper. The display shows the current setting
on the bottom line.
2
Press SAVE Paper or use the navigation buttons to change
the setting. To enable the Paper Save mode, select “ON.” Or
select “OFF” to disable the mode.
3
Press Mode/Enter (Enter for SCX-5112) to save the
selection.
N
OTES
:
• The Paper Save mode is available only when the document is
loaded in the ADF.
• The Paper Save mode will be disabled when you set the collation
copy or the duplex copy.