Manual page
10
.4
<Installing accessories>
Selecting the authentication type
Authentication is a process of identifying the legitimacy of an user to
access a network. You can select whether or not authentication is used.
1
Press
Menu
until
Network
appears on the bottom line of the
display and press
OK
.
2
Press the
Scroll
buttons until
Wireless
appears and press
OK
.
3
Press the
Scroll
buttons until
Authentication
appears and press
OK
.
4
Press the
Scroll
buttons to select the type you want.
•
Open System
: Authentication is not used.
•
Shared Key
: Authentication is used.
5
Press
OK
to save your selection.
6
Press
Stop
to return to Standby mode.
Setting Encryption
If your network uses WEP encryption keys, you can must select the
appropriate encryption type and configure encryption keys. You can
configure up to four keys. The active key must match the key value and
key position (for example, Key 1) configured on other wireless devices in
the network.
1
Press
Menu
until
Network
appears on the bottom line of the
display and press
OK
.
2
Press the
Scroll
buttons until
Wireless
appears and press
OK
.
3
Press the
Scroll
buttons until
Encryption
appears and press
OK
.
Note
If you have set the authentication type to
Open System
, the
Encryption
menu does not display.
4
Set each encryption option and press
OK
.
•
Encrypt. Type
: Select an encryption type:
None
,
64-bit WEP
, or
128-bit WEP
.
•
Key Type
: Select the key type of your network.
•
Using Key
: Select the key to be used in your network.
•
Edit Key
: Enter the key number for the selected key position. The
numbers you can enter as follows:
5
When you have finished, press
Stop
to return to Standby mode.
Hexadecimal
Alphanumeric
64-bit WEP
10 digits
5 characters
128-bit WEP
26 digits
13 characters