Manual page
User’s Guide that came with your PC for further information on
Windows error messages.
feed into the printer:
• Turn over the stack of paper in the tray. Also try
image
repetitively
appears on a
next few sheets
or loose toner,
light print, or
contamination
occurs.
of 2,500 m (8,200 ft) or above.
The high altitude may affect the print quality such
as loose toner or light imaging. You can set this
option through
message appears
during installation.
software from the StartUp Group, then restart
Windows. Reinstall the printer driver.
LPTx” message
appears.
message.
Fault”, “Exception
OE”, “Spool32”, or
“Illegal Operation”
messages appear.
and try printing again.
printer timeout error
occurred,”
messages appear.
Just keep waiting until the printer finishes
printing. If the message appears in standby
mode or after printing has been completed,
check the connection and/or whether an error
has occurred.
when several printer languages are being used.
PostScript errors occur, open the Print Options window and
click the desired selection next to the PostScript errors section.
can not be
printed.
driver may not
be installed
correctly.
version is available for
printing.
• If problem consists, contact a
Error” message
appears.
was too
complex.
complexity of the page or install
more memory.
error page
prints.
not be
PostScript.
PostScript job. Check to see
whether the software
application expected a setup or
PostScript header file to be sent
to the printer.
tray 2 is not
selected in the
driver.
driver has not
been
configured to
recognize the
optional tray 2.
properties, select the
document in
Macintosh with
Acrobat Reader
6.0 or higher,
colors print
incorrectly.
setting in the
printer driver
may not be
matched with
that in Acrobat
Reader.
setting in your printer driver
matches that in Acrobat
Reader.