Manual page
U
SING
O
PERATOR
P
ANEL
3.22
7
Skip this step if you don’t want to use LPD. LPD appears only if
TCP/IP is ON. Press Item until TCP/IP appears on the display.
a
Press Value until ON appears on the display.
b
Press Enter.
c
Press Item until LPD appears on the display.
d
Select the ON by pressing the Value button.
e
Press Enter and PortThru can print using LPD.
8
Skip this step if you don’t want to use AppleTalk protocol.
Press Item until APL TALK appears on the display.
a
Take the ON by pressing the Value button.
b
Press Enter and PortThru can communicate with AppleTalk
protocol.
9
Skip this step if you don’t want to use IPX/SPX protocol.
Press Item until NETWARE appears on the display.
a
Press Value until ON appears on the display.
b
Press Enter.
c
Skip this step if you do not want to configure IPX/SPX. Press
Item until CFG NWAR appears on the display. Select the YES
by pressing the Value button, then Press Enter.
d
Press Item until the frame type you want to use appears on
the display.
e
Select the ON by pressing the Value button.
f
Press Enter.
NETWORK MENU