Manual page
in the fuser unit.
and plug it back in. If the
problem persists, please
call for service.
occurred in the LSU
(Laser Scanning
Unit).
and plug it back in. If the
problem persists, please
call for service.
machine has not
answered after
several redial
attempts.
the receiving machine is
operational.
Add Paper
has run out.
See page 5.5.
in the fuser unit.
and plug it back in. If the
problem persists, please
call for service.
in the fuser unit.
and plug it back in. If the
problem persists, please
call for service.
Open/Close Door
in the feeding area
of the tray.
Open/Close Door
in the fuser area.
13.2.
Check Inside
in the paper exit
area.
13.2.
been pressed during
a fax transmission.
Press Start
Manual Feeder for
Source in the printer
properties.
into the manual tray and
press Start to start
feeding.
If you have multiple
pages to be printed, this
message appears again.
Load the next sheet and
press Start.
1:Yes 2:No
memory has
become full while
trying to store an
original into memory.
press 1 to select Yes.
If you want to send those
pages that have been
successfully stored,
press 2 to select No. You
should send the
remaining pages later,
when memory is
available.
has jammed in the
ADF.
13.1.
unavailable data.
again.
Available
select a group dial
number where only
a single location
number can be
used.
or dial a number
manually using the
number keypad.
machine did not
answer or the line is
already engaged.
minutes.
to set up a copy or
fax operation with no
document loaded
into the ADF.
ADF and try again.
in the memory is full.
jobs in the memory.
jobs and retransmit after
more memory becomes
available. Alternatively,
split the transmission into
more than one operation.
number you tried to
use has no number
assigned to it.
manually using the
number keypad.
Assigned
Page/Cancel Job
operation, but there
are no jobs stored.
if there are any
scheduled jobs.