9.2
<Faxing>
Recommended resolution settings for different original document types
are described in the table below:
Note
The resolution setting is applied to the current fax job.
Darkness
You can select the default contrast mode to fax your originals lighter or
darker.
1
Press Menu until Fax Setup appears on the top line of the display.
2
Press the Scroll buttons until Darkness appears and press Enter.
3
Press the Scroll buttons until the option you want appears and
press Enter.
4
Press Stop/Clear to return to Standby mode.
Note
The darkness setting is applied to the current fax job.
Mode
Recommended for:
Standard
Originals with normal sized characters.
Fine
Originals containing small characters or thin lines or
originals printed using a dot-matrix printer.
Super Fine
Originals containing extremely fine detail. Super
Fine mode is enabled only if the machine with
which you are communicating also supports the
Super Fine resolution.
Photo Fax
Originals containing shades of gray or photographs.
Color Fax
Originals with colors. Sending a color fax is enabled
only if the machine with which you are
communicating supports color fax reception and
you send
the fax manually. In this mode, memory
transmission is not available.
Sending a fax automatically
1
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
For details about loading an original, see page 5.1.
2
Adjust the resolution and the darkness to suit your fax needs. See
page 9.1.
3
Enter the receiving fax machine’s number.
You can use speed dial numbers, or group dial numbers. For details
about storing and searching for a number, see page 10.3.
4
Press Start.
5
If an original is placed on the scanner glass, load another original
and press 1 to add another page.
6
When you have finished, press 2 at the Another Page ? prompt.
After the number is dialed, the machine begins sending the fax
when the receiving fax machine answers.
Note
When you want to cancel a fax job, press Stop/Clear at any
time while sending.
Sending a fax manually
1
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
For details about loading an original, see page 5.1.
2
Adjust the resolution and the darkness to suit your fax needs. See
page 9.1.
3
Press On Hook Dial. You hear a dial tone.
4
Enter the receiving fax machine’s number.
You can use speed dial numbers, or group dial numbers. For details
about storing and searching for a number, see page 10.3.
5
Press Start when you hear a high-pitched fax signal from the
remote fax machine.
Note
When you want to cancel a fax job, press Stop/Clear at any
time while sending.
Notes
• For memory transmission, Super Fine
mode is not available. The resolution
setting is automatically changed to Fine.
• When your machine is set to Super Fine
resolution and the fax machine with
which you are communicating does not
support Super Fine resolution, the
machine transmits using the highest
resolution mode supported by the other
fax machine.