Manual page
S
OLVING
P
ROBLEMS
7.25
7
Back of printouts
are dirty
• Check for leaking toner. Clean the inside of the printer.
Color or Black
pages
• The imaging unit may not be installed properly. Remove the
imaging unit and reinsert.
• The imaging unit may be defective and need replacing. Install
a new imaging unit.
• The printer may require repair. Contact a service
representative.
Loose toner
• If the problem persists, the printer may require repair. Contact
a service representative.
Character Voids
Character voids are white areas within the parts of characters
that should be solid black:
• If you are using transparencies, try another type of
transparency. Due to the composition of the transparency,
some character voids are normal.
• You may be printing on the wrong surface on the paper.
Remove the paper and turn it around.
Horizontal stripes
If horizontally aligned color or black streaks or smears appear:
• The imaging unit may be installed improperly. Remove the
imaging unit and reinsert.
• The imaging unit may be defective. Install a new imaging unit.
• If the problem persists, the printer may require repair. Contact
a service representative.
Problem
Solution
A
A
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc