Manual page
printer does not pass a step, follow the corresponding suggested
solutions.
Online LED on the
control panel lights
green.
Check the power source by plugging the
power cord into another outlet.
to verify that the
printer is feeding
paper correctly. See
page 2.1.
page to see if it
printed correctly.
9.7.
document from a
software application
to verify that the
computer and
printer are
connected and are
communicating
correctly.
computer.
and communication port. If the page is
interrupted during printing, see page 9.5.
checklist does not
resolve the printer
problem, check the
following
troubleshooting
sections.
• “Solving general printing problems” on
• “Common Macintosh problems” on page
suggested solutions.
does not
print.
receiving power.
connections. Check the power
switch and the power source.
selected as the
default printer.
Series or Samsung ML-2850
Series PS as your default
printer.
is not closed.
9.1.
loaded.
cartridge is not
installed.
be in manual feed
mode and out of
paper.
and press the Cancel button
on the control panel.
cable between
the computer and
the printer is not
connected
properly.
and reconnect it.
cable between
the computer and
the printer is
defective.
another computer that is
working properly and try to print
a document. You can also try
using a different printer cable.
incorrect.
setting to make sure that the
print job is sent to the correct
port. If the computer has more
than one port, make sure that
the printer is attached to the
correct one.