Manual page
does not
print.
(Continued)
be configured
incorrectly.
ensure that all of the print
settings are correct.
may be
incorrectly
installed.
the Software Section. Try
printing a test page.
malfunctioning.
panel to determine if the printer
is indicating a system error.
selects print
media from
the wrong
paper
source.
selection in the
printer properties
may be incorrect.
applications, the paper source
selection is found under the
Paper tab within the printer
properties. Select the correct
paper source. See the
Software Section.
not feed into
the printer.
been loaded
correctly.
and reload it correctly.
Check that the adjustable
guides are set correctly.
paper in the tray.
tray.
thick.
printer specifications.
extremely
slow.
very complex.
page(s) or try adjusting the
print quality settings.
To adjust the print quality
settings, reduce the resolution.
If you have set the resolution to
1200 dpi (Best), change it to
600 dpi (Normal). See the
Software Section.
Change the port setting to the
USB or network port to improve
print speed.
Your printer prints A4-sized
paper at 28 ppm and letter-
sized paper at 30 ppm.
extremely
slow.
(Continued)
may have
insufficient
random-access
memory (RAM).
remove any unnecessary
graphics from the document.
is blank.
is too complex.
remove any unnecessary
graphics from the document.
orientation setting
may be incorrect.
your application. See the
Software Section.
and the paper
size settings do
not match.
the printer driver settings
matches the paper in the tray.
Or, ensure that the paper size
in the printer driver settings
matches the paper selection in
the software application
settings you use.
keeps
jamming.
paper in the tray.
tray.
If printing on special print
media, use the manual tray.
of paper is being
used.
printer specifications.
If printing on special print
media, use the manual tray.
debris inside the
printer.
remove the debris.
prints, but
the text is
wrong,
garbled, or
incomplete.
is loose or
defective.
printer cable. Try a print job that
you have already printed
successfully. If possible, attach
the cable and printer to another
computer and try a print job
that you know works. Finally,
try a new printer cable.
driver was
selected.
selection menu to ensure that
your printer is selected.
application is
malfunctioning.
application.
the DOS
environment, the
font setting for
your machine
may be set
incorrectly.
page 1.6.