Manual page
when several printer languages are being used.
printer timeout error
occurred,”
messages appear.
Just keep waiting until the printer finishes
printing. If the message appears in standby
mode or after printing has been completed,
check the connection and/or whether an error
has occurred.
error messages.
click the desired selection next to the PostScript errors section.
can not be
printed.
driver may not
be installed
correctly.
version is available for
printing.
driver, see the Software
Section.
Error” message
appears.
was too
complex.
complexity of the page.
error page
prints.
not be
PostScript.
PostScript job. Check to see
whether the software
application expected a setup or
PostScript header file to be sent
to the printer.
document in
Macintosh with
Acrobat Reader
6.0 or higher,
colors print
incorrectly.
setting in the
printer driver
may not be
matched with
that in Acrobat
Reader.
setting in your printer driver
matches that in Acrobat
Reader.
print.
and switch to the Printers tab in Printers
configuration window to look at the list of
available printers. Make sure that your
machine is displayed on the list. If not,
please, invoke Add new printer wizard to set
up your device.
the printers list. Look at the description in
the Selected printer pane. If its status
contains “(stopped)” string, please, press
the Start button. After that normal operation
of the printer should be restored. The
"stopped" status might be activated when
some problems in printing occurred.
specified in the command line parameter
then remove it to print properly. For Gimp
front-end, select “print” -> “Setup printer”
and edit command line parameter in the
command item.
“Unable to open
mfp port device
file!” when printing
a document.
(via LPR GUI, for example) while a print job is
in progress. Known versions of CUPS server
break the print job whenever print options are
changed and then try to restart the job from
the beginning. Since Unified Linux Driver
locks mfp port while printing, the abrupt
termination of the driver keeps the port locked
and therefore unavailable for subsequent print
jobs. If this situation occurred, please, try to
release the mfp port.
document over the
network in SuSE
9.2, the printer
does not print.
version distributed with SuSE Linux 9.2
(cups-1.1.21) has a problem with ipp
(Internet Printing Protocol) printing. Use the
socket printing instead of ipp or install later
version of CUPS (cups-1.1.22 or higher).