Manual page
area and displays the results on a list. Select one from the
list. You cannot change ‘Operation Mode’ and ‘Channel’. If you
select ‘Custom’ from the list, you can configure the wireless
settings according to your needs and enter a name of up to
32 letters for your ‘Custom’ setting. ‘SSID’ is case sensitive,
so you need to change it carefully. Using the Scroll buttons,
find the alphabet you want and press the Enter button (
letters the same as you entered the first letter. After you
entered the last letter of the name, press the Enter button
(
letters.
operating mode for the print server.
the operation mode to ‘InfraStructure’. ‘InfraStructure’ mode
allows both wireless and cabled computers to send files to the
printer through an Access Point.
automatically according to the network cable’s connection
each time it boots up. If a network cable is detected, the print
server enters ‘Ad-hoc’ mode; if not, it enters ‘InfraStructure’
mode.
print server will scan all available channels for the specified
network and will adapt its channel to the one detected.
Default setting is 10.
authentication (Open System). If required by your network,
the proper authentication method must be configured on the
print server.
encryption keys, you must configure the encryption keys. You
can configure up to four keys. The active key must match the
value and active key position (for example, Key 1) configured
on other wireless devices.