Manual page

Samsung DVD-V9090 User Manual (ver.1.0)
ENG-11
Basic VCR Operation
Basic TV Tuner Operations
On-Screen Menu Navigation
To play a standard VHS videotape, just insert it into the
VCR deck and press the PLAY button. You can turn on
the Auto Play to enable the VCR deck to play
automatically when you insert a videotape that is
missing the Record Safety Tab. See page 29.
1
Insert VHS Tape
Insert a standard VHS videotape into the VCR
deck.
• When a videotape is inserted, power will turn on
automatically.
2
Play Tape
Press the
❿
ll(PLAY/PAUSE) button on the remote
control or on the front panel of the unit. The
videotape will begin to play automatically if it is
missing the Record Safety Tab and Auto Play is
turned on. See page 28.
3
Stop Playback
Press the
s
(STOP) button on the remote control or
on the front panel of the unit.
4
Additional VCR Options
• See pages 28~29 for special VCR Playback
features.
• See pages 31~32 for VCR Recording features.
• See page 33 for Timer Recording features.
The on-screen menus allow you to enable or disable
various functions on your DVD-VCR. Use the following
buttons to open and navigate through the on-screen
menus.
1
MENU Button
Press this button while the DVD is in Stop or Play
mode to open the on-screen MAIN MENU.
2
UP/DOWN and LEFT/RIGHT
Use these buttons to move the selection bar
UP/DOWN and LEFT/RIGHT to cycle through the
menu options.
3
ENTER Button
Press this button to confirm any new settings.
4
RETURN Button
Press this button to return to the last MENU screen
displayed or to exit the on-screen MENU all together.
When watching TV using the DVD-VCR's built-in TV
tuner, use the buttons below.
1
TV/VCR
Press this button to switch between your TV’s tuner
and the VCR’s internal tuner.
• You don’t need to press the TV/VCR button in vcr
mode.
2
Channel UP/DOWN
Use these buttons to move to the previous or the
next channel.
3
0-9 Buttons
Use these buttons to select the desired channel
directly.
4
100 + Buttons
Press this button tune to channels 100 and above.
First, press the 100+ button, then use the numeric
buttons(0-9) to enter the remaining digits of the
channel numeber desired.
• This button is activated only in Cable TV Mode.
5
INFO. Button
Press this button to display the current channel.
• This also works in DVD and VCR mode.
Language : English
Front Display : Auto
Auto Power Off : Off
00417A DVD-V9090/AFS(RF)-eng 5/10/04 3:11 PM Page 11