Manual page
keeps jamming.
in the paper tray.
Multi-Purpose Tray.
paper is being used.
specifications required by the printer. See
page F.3.
method is being used.
paper, should not be printed using the top
output tray (face-down). Use the rear
output tray (face-up) instead.
inside the machine.
debris.
prints, but the
text is wrong,
garbled, or
incomplete.
or defective.
reconnect. Try a print job that you have
already printed successfully.
If possible test the cable by attaching it to
another computer that is working properly
and attempt to print a job. You can also try
using a different printer cable and attempt
to print a job.
was selected.
menu to ensure that your printer is
selected.
is malfunctioning.
malfunctioning.
exit to a DOS prompt and verify
functionality with the following command:
At a C:\ prompt, type Dir LPT1, and press
Enter. (This assumes you are connected
to LPT1.) Exit Windows and reboot the
computer. Turn the printer off and then
back on again.
are blank.
defective or out of toner.
page 5.3.
pages.
contain blank pages.
controller or the board,
may be defective.