Manual page
S
PECIFICATIONS
G.6
N
OTES
:
• Do not use letterhead paper printed with low-temperature inks,
such as those used in some types of thermography.
• Do not use raised or embossed letterhead.
• The printer uses heat and pressure to fuse toner to the paper.
Insure that any coloured paper or preprinted forms use inks that
are compatible with this fusing temperature (200 °C or 392 °F
for 0.1 second).
Paper Specifications
Paper Output Capacity
Category
Specifications
Acid Content
5.5 ~ 8.0 pH
Caliper
0.094 ~ 0.18 mm (3.0 ~ 7.0 mils)
Curl in Ream
Flat within 5 mm (0.02 in.)
Cut Edge Conditions
Cut with sharp blades with no visible
fray.
Fusing Compatibility
Must not scorch, melt, offset, or release
hazardous emissions when heated to
200 °C (392 °F) for 0.1 second.
Grain
Long Grain
Moisture Content
4 % ~ 6 % by weight
Smoothness
100 ~ 250 Sheffield
Output Tray
Capacity
Face-down top output
tray
250 sheets of 80 g/m
2
bond paper
Face-up rear output
tray
100 sheet of 80 g/m
2
bond paper