Manual page
keeps jamming.
paper in the paper tray.
Multi-Purpose Tray.
paper is being used.
required by the printer.
method is being used.
should not be printed using the top output
tray (face-down). Use the rear output tray
(face-up) instead.
inside the machine.
prints, but the
text is wrong,
garbled, or
incomplete.
loose or defective.
Try a print job that you have already printed
successfully. If possible, attach the cable
and printer to another computer and try a
print job that you know works. Finally, try a
new printer cable.
driver was selected.
menu to ensure that your printer is
selected.
application is
malfunctioning.
malfunctioning.
to a DOS prompt and verify functionality
with the following command: At a C:\
prompt, type Dir LPT1, and press Enter.
(This assumes you are connected to LPT1.)
Exit Windows and reboot the computer.
Turn the printer off and then back on again.
are blank.
defective or out of
toner.
page 6.4.
pages.
contain blank pages.
the controller or the
board, may be
defective.