Manual page
extremely
slow.
(Continued)
98/Me, the
Spooling Setting
may be set
incorrectly.
Settings and Printers. Right-
click the Samsung ML-4550
Series PCL 6 printer icon,
choose Properties, click the
Details tab, and then choose
the Spool Settings button.
Select the desired spool
setting.
may have
insufficient
random-access
memory (RAM).
printer. See page 10.1.
is blank.
is too complex.
remove any unnecessary
graphics from the document.
Install more memory in your
printer. See page 10.1.
orientation setting
may be incorrect.
your application. See the
Software Section.
and the paper
size settings do
not match.
the printer driver settings
matches the paper in the tray.
Or, ensure that the paper size
in the printer driver settings
matches the paper selection in
the software application
settings you use.
keeps
jamming.
paper in the tray.
tray.
If printing on special media,
use the multi-purpose tray and
open the rear cover.
of paper is being
used.
printer specifications.
If printing on special media,
use the multi-purpose tray and
open the rear cover.
output method is
being used.
thick paper, should not be
printed using the output tray
(face-down). Use the rear
cover (face-up) instead.
debris inside the
printer.
remove the debris.
prints, but
the text is
wrong,
garbled, or
incomplete.
is loose or
defective.
printer cable. Try a print job that
you have already printed
successfully. If possible, attach
the cable and printer to another
computer and try a print job
that you know works. Finally,
try a new printer cable.
driver was
selected.
selection menu to ensure that
your printer is selected.
application is
malfunctioning.
application.
system is
malfunctioning.
version), exit to a DOS prompt
and verify functionality with the
following command: At a C:\
prompt, type Dir LPT1, and
press Enter. (This assumes
you are connected to LPT1.)
Exit Windows and reboot the
computer. Turn the printer off
and then back on again.
but are
blank.
cartridge is
defective or out of
toner.
cartridge. See page 8.4.
If necessary, replace the toner
cartridge. See page 8.5.
blank pages.
does not contain blank pages.
as the controller
or the board, may
be defective.
representative.
illustrations
incorrectly in
Adobe
Illustrator.
software
application is
wrong.
the Advanced Options window
of the graphic properties. Print
the document again.