2.5
<System setup>
System Setup menu
Use the 5. System Setup menu to configure a variety of printer features.
Item
Explanation
Date & Time
Form Menu
Select Form
Language
This setting determines the language of the text
that appears on the control panel display and
information printing.
Power Save
When the printer does not receive data for an
extended period of time, power consumption is
automatically lowered. You can set how long the
printer waits before going to power save mode.
Auto
Continue
This item determines whether or not the printer
continues printing when it detects the paper
unmatched to your paper setting.
• Off: If a paper mismatch occurs, an error
message will remain on the display and the
printer will remain off-line until you insert the
correct paper.
• On: If the paper mismatch occurs, an error
message will display. The printer will go offline
for 30 seconds, then automatically clear the
message and continue printing.
Altitude Adj.
You can optimize print quality according to your
altitude.
Auto CR
This item allows you to append the required
carriage return to each line feed.
Refer to the following samples:
Note
• This menu item is available when the
optional hard disk is installed.
Values: English, FRANCAIS, Espanol,
Portugues E., Portugues B., Deutsch, Italiano...
Values: [ 5 ] Min, [ 10] Min, [ 15 ] Min, [ 30 ] Min,
[ 60 ] Min, [ 120 ] Min
Values: Off, On
Values: Plain, High, Higher, Highest
Values: LF, LF+CR
LF
LF+CR
AA
BB
CC
AA
BB
CC
Job Timeout
You can set the length of time the printer waits
before printing the last page of a print job that
does not end with a command to print the page.
When a print time-out occurs, the printer prints the
page in the print buffer.
Maintenance
This item allows you to maintain your printer.
•
Clean Drum
: Cleans the OPC drum of the toner
cartridge and produces a cleaning sheet with
toner debris on it.
•
Clean Fuser
: Cleans the fuser unit inside of the
printer and produces a cleaning sheet with
toner debris on it.
•
CLR Empty MSG.
: Prevents the
Toner Low
Replace Toner
message from appearing on the
display. Once you have selected On, this
setting will be permanently written to the
memory of the toner cartridge, and this menu
will be disappeared from the
Maintenance
menu.
•
Supplies Life
: Allows you to check how many
pages have been printed and how much toner
are left in the cartridge.
Clear Setting
This menu item allows you to restore the printer’s
factory default settings.
Item
Explanation
Values:[0-1800] sec:15