Manual page
[Size] In [Tray]
specified in the
printer properties
does not match the
paper you are
loading.
paper in the tray.
Press Cont Key
tray is empty in
manual feed mode.
media and press OK.
You need to press
OK each page to be
printed.
Cycle Power
in the fuser unit.
cord and plug it back
in. If the problem
persists, please call
for service.
Cycle Power
occurred in the LSU
(Laser Scanning
Unit).
cord and plug it back
in. If the problem
persists, please call
for service.
Paper Empty
the multi-purpose
tray.
multi-purpose tray.
See page 5.6.
printing a cleaning
sheet now.
minutes.
Cycle Power
in the fuser unit.
cord and plug it back
in. If the problem
persists, please call
for service.
full.
sheets of plain paper.
Once the paper is
removed from the
output tray, the
printer resumes
printing.
Cycle Power
in the fuser unit.
cord and plug it back
in. If the problem
persists, please call
for service.
Open/Close Door
before reaching to
the exit sensor.
page 9.3.
Open/Close Door
in the feeding area
of the tray.
page 9.2.
Open/Close Door
in the fuser area.
powders on a feed
sensor.
page 9.3.
see page 8.1.
Check Inside
in the paper exit
area.
page 9.4.
Open [Tray]
in the displayed
optional tray.
page 9.2.
printing jobs.
printing.
and ready to print.
LSU
Scanning Unit) in
your printer is
checking some
problems detected.
minutes.
Temperature
printer is checking
some problems
detected.
minutes.
power save mode.
received, it switches
to on-line
automatically.
Cassette Out
open.
locks into place.
Paper Empty
the tray.
tray. See page 5.5.
Please Wait...
warming up now.
minutes.