Manual page
same I/O interface (MFP port), the situation of
simultaneous access of different “consumer”
application to the same MFP port is possible. To
avoid possible conflicts, only one of them at a time
is allowed to gain control over the device. The
other “consumer” will encounter “device busy”
response. This can usually happen while starting
scan procedure, and appropriate message box
appears.
assigned to your scanner. MFP port's symbol /dev/
mfp0 corresponds to LP:0 designation displayed in
the scanners’ options, /dev/mfp1 relates to LP:1
and so on. USB ports start at /dev/mfp4, so
scanner on USB:0 relates to /dev/mfp4
respectively and so forth sequentially. In the
Selected port pane you can see if the port is
occupied by some other application. If this is the
case, you should wait for completion of the current
job or should press Release port button, if you are
sure that the present port's owner is not
functioning properly.
• Check if your machine is connected to the
O error is reported while scanning.
same I/O interface (MFP port), the situation of
simultaneous access of different “consumer”
application to the same MFP port is possible. To
avoid possible conflicts, only one of them at a time
is allowed to gain control over the device. The
other “consumer” will encounter “device busy”
response. This can usually happen while starting
scan procedure, and appropriate message box will
be displayed.
To identify the source of the problem, you should
open MFP ports configuration and select the port
assigned to your scanner. MFP port’s symbol /dev/
mfp0 corresponds to LP:0 designation displayed in
the scanners’ options, /dev/mfp1 relates to LP:1
and so on. USB ports start at /dev/mfp4, so
scanner on USB:0 relates to /dev/mfp4
respectively and so forth sequentially. In the
Selected port pane you can see if the port is
occupied by some other application. If this is the
case, you should wait for completion of the current
job or should press Release port button, if you are
sure that the present port’s owner is not
functioning properly
which is commonly used on Unix clones, it is not
recommended to use both package on the same
machine.
want to use again.
yourself. Please, log in as root user and invoke the
following command:
install Xsane plug-in for Gimp on the your
computer. You can find Xsane plug-in package for
Gimp on Linux distribution CD or Gimp home page.
For the detail information, refer to the Help for
Linux distribution CD or Gimp Front-end
application.