68 _Troubleshooting
Memory Full
The memory is full.
Delete unnecessary fax
jobs and retransmit after
more memory becomes
available. Alternatively,
split the transmission into
more than one operation.
Not Assigned
The speed button or
speed dial number
you tried to use has
no number assigned
to it.
Enter the number
manually using the
number keypad or store
the number or address.
NonSAMSUNG
Toner
The toner cartridge is
not a Samsung-
genuine cartridge.
Press OK to toggle
the message to Stop
or Continue.
Stop
You can select either Stop
or Continue with the left/
right arrow.
If you select Stop by
pressing OK on the control
panel, the machine stops
printing. If you select
Continue, the machine
keeps printing, but the
quality cannot be
guaranteed.
If you do not select any,
the machine will work as
Stop is selected.
Replace the
corresponding toner
cartridge with a Samsung-
genuine cartridge. See
One Page is
Too Large
Single page data
exceeds the
configured mail size.
Reduce the resolution and
try again.
Operation Not
Assigned
You are in the Add
Page/Cancel Job
operation, but there
are no jobs stored.
Check the display to see if
there are any scheduled
jobs.
Out-Bin Full|
Open/Close Door
The output tray of the
machine is full of
paper.
Remove paper. Open the
front cover and than close
it.
Paper Jam 0
Open/Close Door
Paper has jammed in
the feeding area of the
tray.
Clear the jam. See page
Paper Jam 1
Open/Close Door
Paper has jammed
inside the machine.
Clear the jam. See page
Paper Jam 2
Check Inside
Special print media
has jammed in the
paper exit area.
Clear the jam. See page
Refilled Toner
The toner cartridge
you have installed is
not genuine or refilled.
The print quality may get
poor if the refilled toner
cartridge is installed, since
its characteristics may
significantly differ from the
genuine.
We recommend Samsung-
genuine toner cartridge.
MESSAGE
MEANING
SUGGESTED
SOLUTIONS
Replace Toner
This message
appears between
Toner Empty and
Toner Low status.
Replace the toner
cartridge with a new one.
Replace
[xxx] Soon
The life of the part
expires soon.
service.
Retry Redial?
The machine is
waiting for a specified
time interval to redial
a previously busy
station.
You can press OK to
immediately redial, or
Stop/Clear to cancel the
redial operation.
Scanner locked
The scanner module
is locked
Unlock the scanner and
press Stop/Clear.
Send Error
(AUTH)
There is a problem in
SMTP authentication.
Configure the
authentication setting.
Send Error
(DNS)
There is a problem in
DNS.
Configure the DNS setting.
Send Error
(POP3)
There is a problem in
POP3.
Configure the POP3
setting.
Send Error
(SMTP)
There is a problem in
SMTP.
Change to the available
server.
Send Error
(Wrong Config)
There is a problem on
the network interface
card.
Configure your network
interface card correctly.
Toner Empty
A toner cartridge has
almost reached its
estimated cartridge
life.
Samsung
does not
recommend
using non-
genuine Samsung
toner cartridge such
as refilled or
remanufactured.
Samsung cannot
guarantee non-
genuine Samsung
toner cartridge's
quality. Service or
repair required as a
result of using non-
genuine Samsung
toner cartridges will
not be covered under
the machine warranty.
You can choose either
Stop or Continue as
shown on the control
panel. If you select Stop,
the printer stops printing
and you cannot print any
more without changing the
cartrdige. If you select
Continue, the printer
keeps printing but the
printing quality cannot be
guaranteed.
Replace the toner
cartridge for the best print
quality when this message
appears. Using a cartridge
beyond this stage can
MESSAGE
MEANING
SUGGESTED
SOLUTIONS