Manual page
Auth Failed
authentication fail
while connecting to
the global server this
message displays.
account and password.
Comm. Error
displays when there
is a communication
error between the
global server and
the device.
• Contact a LDAP Server
Configured
server is configured,
this message
displays.
configuration settings.
Found
unable to find the
Global server.
address, The LDAP
server address is
incorrect, or the server
has failed.
Available
select a group
location number
where only a single
location number can
be used, such as
when adding
locations for a
Multiple Send
operation.
or dial a number
manually using the
number keypad.
received a fax from
which is registered
as a junk fax..
be deleted.
Reconfirm junk fax setup,
see page 10.2.
Address
you have entered is
invalid.
address.
machine did not
answer or the line is
already engaged.
minutes.
cannot connect with
the receiving fax
machine or has lost
contact because of a
problem with the
phone line.
persists, wait an hour or
so for the line to clear
and try again.
Or, turn the ECM mode
on. See page 10.1.
Cycle Power
in the fuser unit.
and plug it back in. If the
problem persists, please
call for service.
Cycle Power
occurred in the LSU
(Laser Scanning
Unit).
and plug it back inches. If
the problem persists,
please call for service.
Cycle Power
occurred in the LSU
(Laser Scanning
Unit).
and plug it back inches. If
the problem persists,
please call for service.
Locked
in the main motor.
front cover.
Server Support
larger than the
supported size by
SMTP server.
reduce the resolution.
jobs and retransmit after
more memory becomes
available. Alternatively,
split the transmission into
more than one operation.
Paper Empty
the multi-purpose
tray.
purpose tray. See page
5.7.
with the network.
administrator.
machine has not
answered after
several redial
attempts.
the receiving machine is
operational.
speed dial number
you tried to use has
no number or email
address assigned to
it.
email address manually
using the number keypad
or store the number or
address.
Add Paper
has run out.
See page 5.5.
Too Large
exceeds the
configured mail size.
and try again.