Manual page
Cycle Power
occurred in the LSU
(Laser Scanning
Unit).
cord and plug it back
inches. If the problem
persists, please call
for service.
Locked
in the main motor.
the front cover.
Server Support
larger than the
supported size by
SMTP server.
reduce the resolution.
fax jobs and
retransmit after more
memory becomes
available.
Alternatively, split the
transmission into
more than one
operation.
Paper Empty
the multi-purpose
tray.
multi-purpose tray.
See page 5.6.
with the network.
administrator.
machine has not
answered after
several redial
attempts.
that the receiving
machine is
operational.
or speed dial
number you tried to
use has no number
or email address
assigned to it.
email address
manually using the
number keypad or
store the number or
address.
Add Paper
has run out.
tray. See page 5.5.
Too Large
exceeds the
configured mail size.
and try again.
Cycle Power
in the fuser unit.
cord and plug it back
in. If the problem
persists, please call
for service.
Assigned
Page/Cancel Job
operation, but there
are no jobs stored.
see if there are any
scheduled jobs.
Cycle Power
in the fuser unit.
cord and plug it back
in. If the problem
persists, please call
for service.
Open/Close Door
in the feeding area
of the tray.
page 14.2 and
page 14.3.
Open/Close Door
in the fuser area.
page 14.4.
Check Inside
in the paper exit
area.
page 14.4.
then on and the
machine’s memory
has not been back
up.
were trying to do
before the power
failure must be
completely re-done.
is at the end of its
life.
cartridge. See page
13.5.
waiting for a
specified time
interval to redial a
previously busy
station.
immediately redial, or
Stop/Clear to cancel
the redial operation.
is locked
and press Stop/
Clear.
LSU
Scanning Unit) in
your printer is
checking some
problems detected.
minutes.
Temperature
machine is checking
some problems
detected.
minutes.
(AUTH)
in SMTP
authentication.
authentication setting.