Manual page
Insert a standard VHS videotape into the VCR
deck.
• When a videotape is inserted, power will turn on
Press the
videotape will begin to play automatically if it is
missing the Record Safety Tab and Auto Play is
turned on. See page 28.
Press the
• See pages 28~29 for special VCR Playback
• See page 33 for Timer Recording features.
Press this button while the DVD is in Stop or Play
mode to open the on-screen MAIN MENU.
Use these buttons to move the selection bar
UP/DOWN and LEFT/RIGHT to cycle through the
menu options.
Press this button to confirm any new settings.
Press this button to return to the last MENU screen
displayed or to exit the on-screen MENU all together.
Press this button to switch between your TV’s tuner
and the VCR’s internal tuner.
• You don’t need to press the TV/VCR button in vcr
Use these buttons to move to the previous or the
next channel.
Use these buttons to select the desired channel
directly.
Press this button tune to channels 100 and above.
First, press the 100+ button, then use the numeric
buttons(0-9) to enter the remaining digits of the
channel numeber desired.
• This button is activated only in Cable TV Mode.
Press this button to display the current channel.
• This also works in DVD and VCR mode.
Auto Power Off : Off
Press the OPEN/CLOSE button on your remote
control or on the front panel of the unit to turn on
the power and open the disc tray.
Put a disc in the center of the tray, with the label-
printed side facing up.
Press the OPEN/CLOSE button on your remote
control or on the front panel of the unit to close the
disc tray.
Press the
• Most discs will start to playback as soon as the
• See pages 16 ~ 21 for advanced DVD Setup options.
• See pages 22 ~ 28 for special DVD Playback
Press the POWER button on the remote control or
front panel to turn on the DVD-VCR.
Press the DVD button on the remote control or front
panel when you want to control the DVD deck.
• The DVD indicator will light on the Front Panel
Press the VCR button on the remote control or front
panel when you want to control the VCR deck.
• The VCR indicator will light on the Front Panel
Press the INPUT SEL. button repeatedly to cycle
through all of your input sources, including the
Tuner(Ch##), Line 1 (rear AV input), and Line 2
(front AV input).
• Input selection is only available when the VCR
Before You Begin...
• If your A/V receiver is equipped with a Dolby
Connect a digital coaxial cable or an optical cable
from the Digital Audio Out jack on the rear panel of
the DVD-VCR to the corresponding Digital Audio
Input jack on your A/V Receiver:
• Optical
• Coaxial
• Use whichever connection is available on your