Manual page
In the DVD in Stop or Play mode, press the MENU
button.
Use the UP/DOWN buttons to highlight
“FUNCTION” then press the ENTER button.
Using the UP/DOWN buttons to highlight “VCR
Function” then press ENTER to select.
Highlight “Go to [0: 00: 00]”, then press the
ENTER button.
button.
ENTER button.
ENTER button.
Repeat Step 3 above to set start time, end time,
date and record speed. Date can be set for one
time, daily or weekly recording. See below.
Press the RETURN button to finish setting the timer
recording. Stop the VCR or turn the power off.
Then the VCR will automatically turn on and begin
recording at the time you set. To stop the timer
recording, press the POWER button or press the
If the length of the videotape is not long enough for
a timer recording in the SP mode, set the recording
tape speed to “AUTO”. Recording will start in the
SP mode. If the length is not long enough, the tape
speed will automatically change from SP mode to
SLP mode.
Weekly [Sun’s~Sat’s]: Use this to record TV
programs on the same channel at the same time
every week. Daily [MO - FR] : Use this to record TV
programs on the same channel at the same time
every day Monday through Friday.
/
/
/
/
Follow the instructions on page 30 to begin
recording.
While in Record mode, press the (REC) button
again to activate One-Touch Recording (OTR).
• Record length 0:30 appears on the On-Screen
30 minutes.
Continue pressing (REC) to add recording time in
30 minute increments up to 4 hours.
• The DVD-VCR stops recording automatically
be Automatically turned off when the OTR
finished.
1:00
1:30
Follow the Basic Recording instructions on page 30.
Press the SPEED button on the remote control to
set the Record Speed to one of the following
options:
• SLP – Super Long Play, for maximum recording
With the Timer Recording function, you can program
To Begin Setting the Timer Recording,
Press the MENU button or the TIMER button while
the VCR is in Stop or Play mode.
Use the UP/DOWN buttons to highlight
“PROGRAM” then press the ENTER button.
Use the Right and UP/DOWN buttons to set the
channel. Press the RIGHT button to move to the
next setting.