English - 31
S
ystem Setup
❚
3D Noise Reduction
• Off : Normal
• On : Select to remove noise from the screen.
❚
HDMI Resolution
This setting is used when the unit is connected by
HDMI or DVI with Display devices (TV, projector, etc).
• 480p/576p : 720 x 480, 720 x 576
• 720p : 1280 x 720
• 1080i : 1920 x 1080
❚
Output selection
• Connect the DVD-VR325 to your TV via HDMI or
DVI. Set your TV's input to HDMI or DVI.
• Press the P.SCAN button while the unit is in Stop
mode to select the HDMI output resolution as
follows: 480i
¡ 480p ¡ 720p ¡ 1080i
Consult your TV User’s Manual to find out if
your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV
User’s Manual regarding Progressive Scan
settings in the TV’s menu system.
If Video Output is set incorrectly, the screen
may be blocked.
The resolutions available for HDMI output
depend on the connected TV or projector.
For details, see the user’s manual of your TV
or projector.
When the resolution is changed it may take a
few seconds for a normal image to appear.
If you set the HDMI output resolution 720p or
1080i, HDMI output provides better picture
quality.
HDMI/DVI does not support 480i. Video with
480i resolution can only be viewed through the
analog outputs (Composite/S-Video/Component)
Note
No Disc Video
MOVE
SELECT
RETURN
EXIT
Setup
Timer Rec.
TV Aspect
: 16:9 Wide
√
√
Input Level
: Darker
√
√
Black Level
: 7.5 IRE
√
√
3D Noise Reduction : Off
√
√
HDMI/DVI Resolution : 480P
√
√
: Mode A
√
√
480P
720P
1080i
This function depends on disc type. It may not
work for some disc types.
IRE: Short for the Institute of Radio Engineers. An
IRE unit is a relative unit of measure equal-
ing 1/140th of the peak-to peak (p-p) video
amplitude.
Note