Manual page
between the ANTENNA
OUT terminal on the
cable box and the B–IN
terminal on the A/B
switch.
between the other OUT
terminal on the splitter
and the A–IN terminal
on the RF (A/B) switch.
cable between the OUT
terminal on the RF (A/B)
switch and the VHF/UHF
terminal on the rear of
the TV.
TV system (according to the instructions on pages 2.1-2.3). Skip step 1 if you have not yet
connected to an antenna or a cable system.
Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B
switch to “B,” you will need to tune your TV to the cable box’s output channel, which is usu-
ally channel 3 or 4.)
antenna from the back
of the TV.
antenna to the
ANTENNA IN terminal
on the back of the VCR.