Manual page
system has some problem. To solve the problem, see
“Troubleshooting Error Messages” on page 6.20.
seconds until all LEDs blink slowly, and release.
sheets
seconds until all LEDs blink fast, and release.
If your printer has a network card, the network
configuration sheet prints out with a printer
configuration sheet.
Setting (When you use
the Network card)
20 seconds until all LEDs blink slowly, and release.
This item restores the factory default of the network
configuration. This setting will only take effect after
you have reset the printer.
Multi-purpose tray, when you have selected Manual
Feed for Source from your software application. For
detailed information, see “Using the Manual Feed
Mode” on page 3.12.
10 seconds until all LEDs turn on, and release. After
cleaning the printer, one “cleaning sheet” (see
page 5.7) is printed.
LED blinks while the print job is cleared from both the
printer and the computer, and then the printer returns
to Ready mode. This may take some time depending
on the size of the print job.
off
Save mode on or off.
For detailed information, see “Using the Toner Save
Mode” on page 4.9.